![\"\"](\"https:\/\/manufacturing-review.com\/wp-content\/uploads\/2023\/01\/123345669-600x445.jpg\")
<\/p>\n![\"\"](\"https:\/\/manufacturing-review.com\/wp-content\/uploads\/2023\/01\/1233-600x445.jpg\")
<\/p>\n<\/p>\n
<\/p>\n
The macro high-speed recordings are impressive: Viewed in slow motion, a carbide milling tool removes a perfectly shaped brass chip. The Blaser Synergy 735 metalworking fluid becomes cloudy around the curling chip exactly where the heat is greatest. It leaves an oil-like phase and thus forms an even more effective lubricating emulsion. In an extensive series of tests in the in-house Technology Center, the metalworking fluid experts from Blaser Swisslube analyze machining processes down to the finest detail.The principle: To achieve better metalworking fluids faster through expertise and data.<\/p>\n
<\/p>\n
The idea of capturing the machining process, chip formation and the behavior of the metalworking fluid more precisely than ever before through photos and videos came about as part of a joint project with the renowned ETH Zurich. The research and development team at Swiss metalworking fluids experts, Blaser Swisslube, set about the planning and implementation. The use of a high-speed camera with a macro lens, which is placed behind a sight glass to keep the metalworking fluid at a distance, should make uniquely sharp, precise recordings possible. A ring light was used to provide the necessary light intensity, as well as a carbide cutter with a helix angle of 0\u00b0 that was specially ground for this particular test.<\/p>\n
<\/p>\n
The results are fascinating: The high-speed recordings showed for the first time that the mechanism of action of oil-free, water-soluble metalworking fluid, Synergy 735 namely its improved lubricating effect at higher temperatures also occurs during machining and is fast enough to optimize milling processes. Synergy 735 thus changes its properties and adapts to the machining process like a chameleon.<\/p>\n
<\/p>\n
<\/p>\n
<\/p>\n
<\/p>\n
<\/p>\n
\u201cOur Technology Center allows us to take a closer look than our competitors. This focus on all the details and the cooperation between our chemists and the machining experts enables us to develop metalworking fluids that improve processes sustainably, reduce production costs and prolong tool life,\u201d explains Marc Blaser, CEO of Blaser Swisslube.<\/p>\n
<\/p>\n
As the Synergy 735 metalworking fluid used in the test described cools down, it becomes clear again, keeping the machine clean and allowing a good view of the machining process. The advantages also include the neutral odor and excellent skin compatibility. Synergy 735 provides flawless finishes on a variety of materials from aluminum and titanium alloys to CrNi steels. The minimal foaming means the coolant is also ideally suited to high-pressure systems.<\/p>\n
<\/p>\n
Blaser Swisslube\u2019s Technology Center has been undergoing continuous expansion for more than 10 years. At present, research is carried out using four CNC milling machines and a state-of-the-art grinding machine in a facility covering an area of more than 1,500 m\u00b2 (16\u2018146 sq ft). New developments are tested and customers\u2019 production situations are simulated under realistic conditions. High-precision measuring devices and sensors enable the data acquired to be interpreted correctly.<\/p>\n
<\/p>\n
<\/p>\n
![\"\"](\"https:\/\/manufacturing-review.com\/wp-content\/uploads\/2023\/01\/Picture_3-392x600.jpg\")
<\/p>\n
<\/p>\n
<\/p>\n
Measuring Wear Reveals Potential Savings<\/strong><\/p>\n <\/p>\n For example, a microscope camera for measuring wear automatically takes microscopic images of the turning plate every two minutes. \u201cTool wear often limits the economic viability of a process. The new measuring options give us meaningful information, directly from the machine,\u201d explains Dr.Linus Meier, a tribology specialist at Blaser Swisslube. The optimized data flow means that changes to the metalworking fluid can be implemented more quickly and easily. \u201cThis is good news for our customers. That\u2019s because high-performance metalworking fluids offer enormous savings potential in production, whether through increased productivity or reduced tool wear,\u201d emphasizes Linus Meier.<\/p>\n <\/p>\n A Holistic Look at Liquid Tool\u2122<\/strong><\/p>\n <\/p>\n The perfect metalworking fluid often requires more than a dozen ingredients, including oils, emulsifiers and additives: producing a metalworking fluid to serve as a liquid tool that optimizes the efficiency of the entire production process, requires both sophisticated formulations from our researchers and manufacturing expertise from our machining technologists. Blaser Swisslube has relied on the collaboration between both disciplines for some time now. Marc Blaser: \u201cOnly if our specialist chemists are able to get to know the coolant on site as part of a performance test and then interpret the data acquired by the manufacturing technologists, are we able to make great progress in metalworking fluid development.\u201d","protected":false},"excerpt":{"rendered":" The macro high-speed recordings are impressive: Viewed in slow motion, a carbide milling tool removes a perfectly shaped brass chip. The Blaser Synergy 735 metalworking fluid becomes cloudy around the curling chip exactly where the heat is greatest. It leaves an oil-like phase…<\/p>\n","protected":false},"author":1,"featured_media":10140,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"_links_to":"","_links_to_target":""},"categories":[14],"tags":[3216,3217],"yoast_head":"\n